I'm talking about the square pins we see on the pictures you sent us... It looks like the ones I have on my piano, and none of the tips which came (#1 #2 #3) with my hale extension tuning hammer matches. they are all too large. the only tuning lever I have, which works is tagged #0. I have recently found a #1 tip which nearly fits, but it's far from perfect. Philippe Errembault ----- Original Message ----- From: alan forsyth To: Pianotech List Sent: Sunday, May 14, 2006 8:56 PM Subject: Re: The pitch raise speech (not to be read by ladies) If you are talking about the oblong pins, I've never come across a decent tip that fits properly. Most of those pins are prior to 1880. As for the normal pins, my medium star tip seems to do the job most of the time. AF ----- Original Message ----- From: Philippe Errembault To: Pianotech List Sent: Sunday, May 14, 2006 5:08 PM Subject: Re: The pitch raise speech (not to be read by ladies) Alan What kind of tip do you use on those pins ? I have the same kind of piano, and the pins are so narrow that I had quite a hard time finding a tip that would fit on it... Philippe Errembault ----- Original Message ----- From: alan forsyth To: Pianotech List Sent: Saturday, May 13, 2006 12:54 AM Subject: Re: The pitch raise speech (not to be read by ladies) This is the sort of [Censored] I have to put up with nearly every day! This piano will not raise above A425Hz -------------- section suivante -------------- Une pi?ce jointe HTML a ?t? nettoy?e... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060515/e3490543/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC