_____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Erwinspiano at aol.com Sent: October 14, 2006 11:33 AM To: pianotech at ptg.org Subject: Re: New Hammers on Old Piano Hi Del/ Terry No board. I'm keeping it original. It's in really good shape. The mouse's ruined the pin block. The pins were really tight but then I realized they were treated with that organically produced pin tightener.......Urine-tune? Dale Again, check. You may be able to drop the pinblock out of the piano without removing the whole plate/soundboard assembly. I replaced the block in my 9' JB without removing much of anything. Del -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061014/e5d13341/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC