New Hammers on Old Piano

[Erwinspiano at aol.com]

In a message dated 10/14/2006 12:16:16 P.M. Pacific Standard Time,  
fandrich at pianobuilders.com writes:

Again, check. You may be able to drop the pinblock out of  the piano without 
removing the whole plate/soundboard assembly. I replaced the  block in my 9' 
JB without removing much of anything.
 
Del



 Yes I see but  I'm going  to re-spray the plate & clean up the board & 
refinish the case.   It's easier to refinish with out the stuff in it.  But you 
know that.  Thanks.
 It's a very Cool piano
  Dale
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061014/42209f0f/attachment.html