Hi Ed, When it comes to what the total charge is for a job sometimes it is cheaper to buy new than to recondition the old--taking into consideration your labor charge. It's good that you are getting the experience of rebuilding the butts, because sometimes, that's exactly what you'll have to do when new parts <that fit> aren't available. Barbara Richmond, RPT near Peoria, IL ----- Original Message ----- From: "ed miller" <edmiller3 at hotmail.com> To: <pianotech at ptg.org> Sent: Sunday, October 22, 2006 8:05 AM Subject: removing shanks from butts > > > Thanks for all your ideas. Heat did the trick. > > I'm rebuilding the butts, rather than buying new ones to get the > experience of doing all of the repairs involved. This is my practice > piano. I figured I'd get more practice by completely rebuilding the butts > than just simply buying new ones. > > I'm suprised to hear a few of you say it is cheaper to replace the butts > with new ones. According to my research it is MUCH cheaper to rebuild the > butts myself (based soley on the price of parts, not including > labor....since this is my own piano and I'm looking for practice, labor > time is not a factor). The following prices came from the Schaff catalog: > > Catcher buckskin $2.35 + butt buckskin $2.06 + Bridle straps $5.50 + > Hammer butt felt squares $1.38 + Flange bushing felt per strip .86 + bag > of center pins $8.60 = $20.75 > > Set of upright brass rail butts No. 509 = $194.83 > > $20.75 to rebuild, compared to $194.83 to buy new. > > > Ed > > _________________________________________________________________ > Try the next generation of search with Windows Live Search today! > http://imagine-windowslive.com/minisites/searchlaunch/?locale=en-us&source=hmtagline >
This PTG archive page provided courtesy of Moy Piano Service, LLC