May not be achievable is what I meant. If you can move the capstan a fair bit you can probably get it under 6 but then the hammers will still need to be lighter to satisfy most folks & regulation still a longish blow & a shortish dip. One easy give a way to preveiw potential action ratio problems is that on any NY Steinway if the belly felt is thick the ratio is usually poor & if it's thin It's your lucky Day!! Dale Did you mean "acceptable ratio may not be _achievable_"? Or did you mean to say that even with a good ratio, this action might still have unacceptable characteristics? Kent -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061029/83c7c91a/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC