I am restringing the bass on an old 6-foot Bauer grand. The upper four notes in the bass section are wound tricords. I'm going to let Jim Arledge smooth out the bass scaling. I suspect he will recommend converting the four tricords to bicords. I'm not rebuilding this piano, the owner just wants it to sound a little better. The few times I have converted tri to bi, I have swapped out agraffes. As this is a very basic "just get her up and running" type job, seems to me I should be just fine using the original agraffes and likely utilizing the outer positions on the agraffes, bridge pins and hitch pins. Any thoughts? Terry Farrell Farrell Piano www.farrellpiano.com terry at farrellpiano.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061030/df5c6b86/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC