> Hi Ron, > I have always drilled the block outside the piano. > Using a jig, so that a small back angle is there, and I have a stream of > air blowing on the bit, for cooling. I do it in the piano, and double drill so I don't have to cool anything. > I have forgotten. :-( > > Do you have a modified drill press to drill the block, or do you do it > free hand? > > John M. Ross With this. Angle adjustable, and valve controlled air float on the bottom plank. It's a hovercraft. Ron N -------------- next part -------------- A non-text attachment was scrubbed... Name: drill1.jpg Type: image/jpeg Size: 189064 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070808/aff51b2a/attachment-0001.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC