Hi David: I had one of these awhile back and located and drilled a new hole for a new pin near the original one. You have a little latitude sideways or above or below, but try to keep the string in about the same place. Drill a hole, then use a drill bit the next size larger cut or ground to the proper length and drive it into the hole just drilled. A little gold paint and "voila." Good luck! Mike Kurta -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071210/ad1478d9/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC