Grand event. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Porritt, David" <dporritt at mail.smu.edu> To: "Pianotech List" <pianotech at ptg.org> Sent: Tuesday, December 18, 2007 11:36 AM Subject: RE: ??Puzzler?? > Grand??? Upwrong?? > > dp > > David M. Porritt, RPT > dporritt at smu.edu > > > -----Original Message----- > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On > Behalf Of Joe And Penny Goss > Sent: Tuesday, December 18, 2007 12:10 PM > To: Pianotech > Subject: ??Puzzler?? > > <G> > Symptoms as reported by client. > Dampers not damping. > > Question to him: are they sticking in pairs? > They reply yes. > Suspect growing or loose leads will be found. > > Arrive to work on piano ( 130 mile one way ) > with all tools and supplys I can think to bring > and need only a small screw driver, a drop of glue > and an inch of bushing felt to fix the problem. > > 21 dampers were involved, none in pairs <g> > > Some dampers would stay up and when pushed > down would make a crusty scraping sound. > > Nothing needed adjusting. > > Joe Goss RPT > Mother Goose Tools > imatunr at srvinet.com > www.mothergoosetools.com >
This PTG archive page provided courtesy of Moy Piano Service, LLC