Muffler bar needed

[David Ilvedson]

There is a great article by the Rappaports in an old Journal about building one.  If you want it really done right, I'd find that article...you might give them a call.



David Ilvedson, RPT

Pacifica, CA 94044









Original message

From: "James Johnson" 

To: pianotech at ptg.org

Received: 11/27/2007 8:28:04 PM

Subject: Muffler bar needed





I have a customer with a Ludwig upright made in 1902.  The muffler bar is missing.  This is a very beautiful piano and I hate to fabricate something out of aluminum.  I'm hoping that someone has a muffler bar from an old piano which would fit the character of this instrument.  The inside dimension is 55 7/8 inch.  I can cut it shorter it I find one too long, or I can attach blocks to the inside of the case if it is a little bit too short.  If you have one you would like to part with, let me know.

Thanks,

James H. Johnson

530-677-8225 (Cameron Park, CA)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071127/b2b13d45/attachment.html