Snap ons!! From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Matthew Todd Sent: Friday, August 01, 2008 7:12 PM To: Pianotech List Subject: Re: Spinet Evaluation Thanks! And with the elbows, based on everyone's experience, what would be the best (wooden, plastic, or vagias snap-on)? Matthew Mike Spalding <mike.spalding1 at verizon.net> wrote: Matthew, It wouldn't be unusual for the drop wires to be bent and/or binding where they hook on the keys, acting like a spring preventing the return of the key. Try disconnecting one from its key, and see if the wippen-butt-hammer assembly returns freely without the constraint of the key-dropwire joint. Mike Matthew Todd wrote: > I returned from the spinet evaluation. The elbows will need to be > replaced. And with the keys that do work, when you release your > finger from the key, the hammer only goes about half way back and you > have to move it with your hand to return it. I am suspecting the > hammer return springs need replacing. It didn't "feel" like tight > flanges, and the hammer springs are where they're suppose to be, but I > guess they just are wore out. > > > Thoughts? > Matthew -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080801/dc52381d/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC