Yipes. I do have one of those things but it scares me a bit. The block of wood and hammer technique looks more and more attractive. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of A440A at aol.com Sent: Monday, August 04, 2008 6:56 PM To: pianotech at ptg.org Subject: Re: More pinblock stuff David writes: << on a B where the bass/tenor transition is curved, I'd be curious to know how others do it-especially that bass/tenor transition area-that is, short of having one of those super duper fancy contour duplicating machines. >> Band saw to shape, blue chalk, grinder bit in a hand-held router. Index mark on bottom of block and plate so it goes back to the same place each time. Speaking of routers, it may be useful to remember when cutting the pinblock free with the Bolduc piloted saw blade, that if you happen to turn it off and set the tool down while it is still spinning, it can still grab the edge of one's shorts and bury itself in the top of one's thigh. (Last Monday, 5 internal sutures, 12 more to close). It could have been a lot worse, but it did take the edge off the week... Ed Foote RPT http://www.uk-piano.org/edfoote/index.html www.uk-piano.org/edfoote/well_tempered_piano.html <BR><BR><BR>**************<BR>Looking for a car that's sporty, fun and fits in your budget? Read reviews on AOL Autos.<BR> (http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000 017 )</HTML>
This PTG archive page provided courtesy of Moy Piano Service, LLC