Delignit-Capped Multilam Pinblock

[AlliedPianoCraft]

> I don't recommend it. (snip)

Why don't you recommend it?

Al G

--------------------------------------------------
From: "Ron Nossaman" <rnossaman at cox.net>
Sent: Saturday, August 09, 2008 11:09 PM
To: "Pianotech List" <pianotech at ptg.org>
Subject: Re: Delignit-Capped Multilam Pinblock

> erwinspiano at aol.com wrote:
>> *  Hey *Terry
>>   What size bit would you recommend for this block for a 2 pin if 
>> someone like a very easily rendered pin?
>>   Dale
> 
> I don't recommend it. I'm drilling (second pass) 6.8mm, which 
> is only 0.014" undersize of 0.282", and get the most easily 
> controllable tighter than average fit I've ever experienced 
> with anything. Everyone I've done one of these for says, it 
> takes some muscle, but the control is extraordinary.
> 
> Ron N
>