Don't jeez me David, lol. I was just sharing the frustration I had. I may not be rich like you to afford center pins at 0.02 cents a piece, come on! (j/k). Matthew David Ilvedson <ilvey at sbcglobal.net> wrote: I apologize to Scott...that is Matthew I'm writing to....;-[ David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Matthew Todd" To: "Pianotech List" Received: 8/16/2008 8:06:06 PM Subject: RE: Center Pin >Speaking of this, does anyone have any idea why Schaff packs their center pin >cases so full, so when you need one, 15 come out, and it's almost impossible to get >them back in! >Scott Jackson wrote: Another beautiful >presentation John. Thank you. >Scott Jackson >Mt Keira, NSW, Australia. >-----Original Message----- >With the nippers. I have done hundreds of thosands of centres and >never needed anything else. >I have published a rough guide here: >it should be possible to repin a set of 88 centres in less than 90 >minutes including set-up time. >JD >TODD PIANO WORKS >Matthew Todd, Piano Technician >(979) 248-9578 > http://www.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080817/42e7600b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC