>some of them are too deep; rebushing rather than easing is necessary >if that's the case. A bushing that is too deep and induces friction can be trimmed with with a chisel point Exacto blade. I use this blade as a follow-up on new bushings to remove any glue beads that might form at the ends of the bushings. It also works if a felt has extended too far into the mortice. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080825/19bbaf9f/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC