Thanks, Jon. Paul -----Original Message----- From: Jon Page <jonpage at comcast.net> To: pianotech at ptg.org Sent: Sat, 2 Feb 2008 10:22 pm Subject: Can you figure out what this does? It's a lost motion compensator for when the hammer rest rail lifts the shanks.? Attached is a photo of one. Notice the linkage between the pivot arm of the? rest rail and the rod that engages the LM compensator.? ? It allows the weight of the hammer and wippen to keep the rear of the key down.? Without it, the front of the key goes down to the degree that the hammer rail? is raised thus sacrificing dip.? -- ? Regards,? ? Jon Page? [Image Removed] ________________________________________________________________________ More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080203/23a4b23e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC