Yes, Terry a great tool. Now how do you get them out, without using the tool from Pianotech which I have to borrow from a fellow technician? Al G ----- Original Message ----- From: Farrell To: pianotech at ptg.org Sent: Monday, February 04, 2008 11:14 PM Subject: Arbor Press I just can't say enough about how great I think this simple shop tool is: the arbor press. I have hammered in far too many balance and front rail pins and enlarged holes, etc. A simple arbor press does such a good job - rail pins, capstans, backchecks, etc. I've only used mine two or three times now on projects, but I just think it is the greatest! No flattening of the pin tops, etc. FWIW: Terry Farrell Terry Farrell Farrell Piano www.farrellpiano.com terry at farrellpiano.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080205/3165c2f4/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC