My only problem with polita/cleaning strings is you end up with some shiny strings and then those places you can't really get to..never liked the look. David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Paul McCloud" <pmc033 at earthlink.net> To: "Pianotech List" <pianotech at ptg.org> Received: 2/18/2008 7:22:55 AM Subject: RE: rusted piano strings >Hi, Mark: > You can use a "polita cake", or other abrasive media to remove the rust. >Polita looks like a rubber eraser, with abrasive particles embedded in it. >Rub it on the strings (not bass strings) and it will remove the rust. >Areas near bridge pins can be cleaned with a brush attachment on a Dremel >tool. A larger rotary steel brush in an electric drill can clean around >the tuning pins. I use steel wool on the bass strings. Be sure to wear a >dust mask and goggles. Have fun! > > Paul >Paul McCloud >Service Technician for PianoSD.com >www.pianoservsd.com >Created with free BlueVoda software: >http://www.vodahost.com/partner/idevaffiliate.php?id=9223_1_3_9 >> [Original Message] >> From: Mark Ernest <mernest at indy.rr.com> >> To: <pianotech at ptg.org> >> Date: 02/18/2008 6:43:30 AM >> Subject: rusted piano strings >> >> I have a customer that owns a Kawai Grand with rusted piano strings. >> Obliviously they would have benefited from a Damper-Chase system, and >> the piano really needs to be restrung; however, is there any way to >> remove some of the rust and extend the life of the current strings. >> >> Mark
This PTG archive page provided courtesy of Moy Piano Service, LLC