Dust Collection

Fenton Murray fmurray at cruzio.com
Wed Feb 20 16:13:22 MST 2008


Grand Piano drop screw tool?Thanks Greg, but I want to skip that part. Looks like a Clearview will be on it's way soon. Man, this will be fun. I want this stuff out of my shop. No noise, no dust.
Fenton
  ----- Original Message ----- 
  From: Greg Newell 
  To: 'Pianotech List' 
  Sent: Wednesday, February 20, 2008 1:20 PM
  Subject: RE: Dust Collection


  You can also make your own with plans from www.plansnow.com .

   

  Greg Newell

  Greg's Piano Forté

  www.gregspianoforte.com

  216-226-3791 (office)

  216-470-8634 (mobile)

   

  From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of William R. Monroe
  Sent: Wednesday, February 20, 2008 3:42 PM
  To: Pianotech List
  Subject: Re: Dust Collection

   

    List,

    I'm getting ready to spend more hard earned bucks on housing my air compressor and dust collection outside. In the process I'm going to switch from the old bag type dust collector to a cyclone system. I've been looking at the following web site and may very likely invest in their product if I'm not convinced otherwise. Anyone out there with a cyclone care to share their thoughts on this product, or another?

    http://www.clearvuecyclones.com/

    Thanks,

    Fenton

  Fenton,

   

  FWIW, my father-in-law invested in Oneida.  Has been very pleased.  I've seen his system and like it very much.  I too will be upgrading my dust collection in the near future and expect to go with the Oneida 3hp.  American Woodworker did a Cyclone evaluation in the January 2006 issue, and, among other things, the Oneida 3hp system has the highest CFM rating at the impeller, and has a pretty good curve as well, as the static pressure increases.  They also provide free ductwork design for you if you give them your shop layout.  Clearvue didn't have a cyclone in the test, so I can't contrast the Oneida with it.  See:

   

  http://www.oneida-air.com/newsite/gorilla_landing.php

   

  Best,

  William R. Monroe

   

   

     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080220/d87e58bd/attachment-0001.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC