The Jahn is a fine lever. The Fujan might be a bit stiffer than the Jahn, but the main difference would be the weight. The Faulk and Fujan levers both have good stiffness and will weigh _significantly_ less than the Jahn. Kent On Feb 21, 2008, at 4:08 PM, AlliedPianoCraft wrote: > I finally gave up my 43 year old tuning hammer and have been using a > Jahn top of the line tuning lever for about a year and a half now. > It wasn't because I'm frugal, It's just that I never thought about > changing it. The stiffness compared to my old hammer made it so much > easier to feel and set the pin. Now I reading all this talk about > the Fujan and Faulk and how much stiffer they are. Are they $200 to > $300 better? and if so, which one is better? It was a big change > from my old hammer. Would it be that much of a change again with > these? > > Al Guecia > > > ----- Original Message ----- > From: "Alan Barnard" <pianotuner at embarqmail.com> > To: <pianotech at ptg.org> > Sent: Wednesday, February 20, 2008 7:10 PM > Subject: RE: CF carbon fiber lever > > >I have bought an embarrassing number of expensive hammers over the > years but no more. I bought the Fujan carbon fiber hammer about a > year and a half ago and have stopped my search for the perfect tool. > > > > I kept my Jahn extension hammer for the occasional "heavy lifting" > and I use it on the top section of grands with a 3" tip, etc., but > the Fujan is my workaday buddy. I don't know how it would compare > with the Faulk, but it is so light, so stiff, so strong, and so > comfortable to use that I do really recommend the Fujan to anyone > seriously evaluating hammers. Site is ... > > > > http://www.fujanproducts.com/buildtube.php?PHPSESSID=d8c8342d5fd2eda1282c18f2095b7f60 > > > > Alan Barnard > > Salem, MO > > > > ----- Original message ---------------------------------------- > > From: "Kent Swafford" <kswafford at earthlink.net> > > To: "Pianotech List" <pianotech at ptg.org> > > Received: 2/20/2008 5:26:20 PM > > Subject: CF carbon fiber lever > > > > > >>I've been using a prototype of a new tuning lever since October. It > >>has a 5/8" carbon fiber shaft, a custom handle, and a full-sleeve > >>aluminum head. The lever is long but still light-weight. The tubular > >>head provides for a very stiff overall feel. I wasn't in the market > >>for a new lever, but I ended up asking to purchase the prototype > >>because I liked it so much. > > > >>You can see the production version at: > > > >>http://www.faulkpiano.com/CFTuningHammer/ > > > > > >>Just a happy customer, > > > >>Kent Swafford > > > > > >>Internal Virus Database is out-of-date. > >>Checked by AVG Free Edition. > >>Version: 7.5.516 / Virus Database: 269.19.2/1224 - Release Date: > 1/14/2008 5:39 > >>PM > > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080221/14959c40/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC