Bridge pattern material

[Dean May]

A drafting supply store will have it- if there are any left around. You
might even check around with local companies that still have drafting
stations in the engineering departments. If you know someone who works there
they can probably get you a pretty good sized piece. I still have remnants
of a big roll salvaged from when they closed the engineering department
where I worked in the mid 80's. 

 

Dean

Dean May             cell 812.239.3359 

PianoRebuilders.com   812.235.5272 

Terre Haute IN  47802

 

  _____  

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of David Chadwick
Sent: Monday, February 25, 2008 7:48 PM
To: pianotech
Subject: Bridge pattern material

 

Greetings, 

I'm attempting my fist soundboard replacement a la Bolduc and I'm looking
for some Mylar to make the hole pattern in the bridges. I've been to arts n
crafts stores, office supplies and the big orange builders store (you know
the one) and all I can find is a 8x11 sheet product. Apparently I can get
this in a roll, as explained on the Bolduc soundboard replacement video with
Christian Bolduc, but what kind of supplier has this stuff. Even been to a
paper specialty shop but no luck. Any help would be greatly appreciated! 

 

David C. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080225/16d34bca/attachment.html