Wurlitzer G411

[Tom Driscoll]

OOOPS ,
    I see that Wesley initiated this thread, not Dean. My bad.
    Tom D.


  Dean,
  Is this is a Chinese piano ?
    <SNIP>.
      Tom Driscoll
      
     
    A customer of mine has a Wurlitzer G411 in which there is approximately .090 inch of clearance in the middle between the front rail of the keyframe and the keybed.  The space decreases from the middle to each of the ends of the keyframe.

     

    What is the best way to solve this problem without sanding an enormous amount of wood from each end of the keyframe?

     

    Wesley Hardman, RPT

    Scottsboro, Alabama
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080225/f1568035/attachment.html