Steinway O revisited

[erwinspiano at aol.com]

??David
??? Since the original rib scale was originally designed to work in conjunction with panel compression stiffness are you?concerned ?about any potential unwanted soundboard resonance's by retaining the original rib?scale placement & same no. of ribs even though they are beefed up to support the entire crown load??
? Dale



-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of David Love
Sent: Saturday, May 17, 2008 11:16 AM
To: 'Pianotech List'
Subject: Steinway O revisited

Here's a Steinway O with modifications: transition bridge (old style
connection), cut-off, modified bass bridge sans cantilever, adjustable plate
mounting system.  Vertical hitches in the plate in the treble section (not
pictured).  Plate goes in today.    

David Love 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080517/a76558dd/attachment.html