[pianotech] Damper Pedal

[Pianoman]

The L bracket thingees are broken or loose on the damper lift rail.
James
James Grebe
Since 1962
Piano Tuning & Repair
Creator of Handsome Hardwood Products(
314) 608-4137   1526 Raspberry Lane   Arnold, MO 63010
Researcher of St. Louis Theatre History
BECOME WHAT YOU BELIEVE!
www.grebepiano.com
----- Original Message ----- 
From: "Matthew Todd" <toddpianoworks at att.net>
To: <pianotech at ptg.org>
Sent: Monday, June 15, 2009 5:14 PM
Subject: [pianotech] Damper Pedal


A client today had a Kimball console. When I depressed the damper pedal, 
most of the dampers in the bass didn't budge, until the mid tenor when they 
barely started lifting, and then by the time you looked at the treble, they 
were away from the strings by an inch or more. Is there some underlying 
issue here besides regulation?


TODD PIANO WORKS
Matthew Todd, Piano Technician
(979) 248-9578
http://www.toddpianoworks.com