[pianotech] Gulbransen Spinet Pedal

Rob McCall rob at mccallpiano.com
Thu Apr 29 21:00:25 MDT 2010


Thanks Wim,

That makes me feel better about heading over there tomorrow. I always like to do the best job I can, but sometimes the instrument pushes back...  :-) My major concerns are diminishing... 

Thanks,

Rob McCall

McCall Piano Service, LLC
www.mccallpiano.com
Murrieta, CA
951-698-1875



On Apr 29, 2010, at 19:43 , tnrwim at aol.com wrote:

> Rob
>  
> I have found Gully's to be very stable pianos. I tuned one that I hadn't tune for 10 years, and accused the owner, a music teacher, of "cheating" on me, but she swore no one touched the piano. It was right on pitch, and just needed a few unisons tweaked,
>  
> The pedal is not broken, The rod has come off. That is why she can still press the pedal down, but nothing is happening. She probably let the pedal slip off her foot, which caused the bottom of the rod to come out out of the hole. At most, one of the pins in the ends of the rod has come out. 
> Wim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100429/6c44b01e/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC