Don't forget the vertical action supports sold by Jurgen at Pianoforte Supply. On Sunday, December 11, 2011, Wim Blees <tnrwim at aol.com> wrote: > Joe, > > If it's just a few mm, put punchings in the bottom of hole in the lyre box, or a flat head screw in the top slot. Other than that, replac the sticks. > > Wim > > Sent from my HTC PURE™, a Windows® phone from AT&T > > -----Original Message----- > From: Joe Wiencek <joespiano at gmail.com> > Sent: Sunday, December 11, 2011 9:41 AM > To: pianotech at ptg.org > Subject: [pianotech] SHort lyre sticks > > What methods have you used for Steinway lyre sticks that are too loose > to support the lyre, either from the keybed slots getting chewed up > and eroded, or from lyre sticks that are just too short? > > Thanks for all help, > > Joe Wiencek > > > > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111211/9b4b3fca/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC