Ryan, you described the best design. It's just that simple. Don't leave to much overhang, so you can get close to where it's screwed to the case. Al - High Point, NC On Dec 28, 2011, at 8:13 PM, Ryan Sowers wrote: > Hello list, > > Does anyone have a picture of a tool that they use to adjust the tension on Steinway action shift springs. I once saw a tool they use in the factory, but Steinway doesn't sell it. It looked pretty simple - basically like a flat, rectangular piece of metal with a slot that fit over the spring. Before trying to make one I thought I'd see if anyone had figured out the best design for this. > > Ryan -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111229/a8e0ff8c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC