D

[Kent Swafford]

There is available space for additional dampers on neither the guide 
rail nor the lifter rail. Both the guide rail _and_ lifter rail would 
have to be lengthened...



Kent


On Sunday, September 7, 2003, at 02:19  PM, Erwinspiano@aol.com wrote:

>        It would probably be easy enough to make a short piece of guide 
> rail and screw it to the existing  screw hole or another screw hole 
> could be drilled. You could add back the three missing damper heads 
> and underlevers which is advisable and solve the problem.
>          Dale