[CAUT] back check wires

[Roger Jolly]

---------------------- multipart/alternative attachment

Hi Ric,
              I prefer the thinner wire, Install the new wires by dipping 
them in a slow cure Epoxy.  The thinner wire is easier to regulate and 
tends to be a little quieter.
Now I go back to sleep.  <G>
Regards Roger


At 10:32 AM 1/4/2005, you wrote:
>Hi folks
>
>Doing a rebuild on an Petrof 235 and it looks like I I have a choice of 
>replacing back check wires with 2.9 mm diameters, or use the existing size 
>of 2.5 mm along with some resizing of the holes in the keys. The existing 
>wires are bent in every which way you can imagine and loose in the keys.
>
>What I would like to get opinions on is whether or not any of you have any 
>preferences in regards to diameter of the wire. Thicker means stronger... 
>not necessarily a good thing...
>
>So whataya whataya ??
>
>Thanks
>
>RicB
>_______________________________________________
>caut list info: https://www.moypiano.com/resources/#archives

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/2f/88/96/53/attachment.htm

---------------------- multipart/alternative attachment--