Ron, My question is; have you welded the dent puller slide hammer to the threaded screw of the vise grip or what? The dent puller I found that was close to the right size was still too large a diameter rod to thread down to the vise grip size. Maybe you use more robust dies than I do. :-) all the best, Greg Newell At 11:24 PM 12/13/2006, Ron Nossaman wrote: >>Fred and list, >> Personally I'd like to see a small vise grip attached to a >> slide hammer. I'd heard someone was using something like that but >> have been unable to get the supply houses to make one. Anyone have a source? >>Greg Newell > > >Fred, Greg, and all the ships at sea, >The slide hammer works great. A cheap dent puller for the slide >weight (start with Harbor Freight or the like), and a rod that can >be threaded to fit the Vise-Grip, and you're there. Easy enough to >make, and very effective. >Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC