[CAUT] Schwander "balancier spring neutralizer"

[Ed Sutton]

Jim-
Nifty!
Would it be possible to make a narrow clamp that could attach to the wippens on the rail, so that you could check the resistance without pulling the wippens?
Ed S.
  ----- Original Message ----- 
  From: Jim Busby 
  To: College and University Technicians 
  Sent: Thursday, March 06, 2008 5:57 PM
  Subject: [CAUT] Schwander "balancier spring neutralizer"


  List,

   

  Attached are pics of the little device I made out of a damper wire to couple the spring to the balancier and "neutralize" it so you can measure the friction. Works great! (Thanks again Jurgen)

   

  Someone will probable improve it before you can say "Bob's your Uncle", but this works the best out of my two or three tries.

   

  Make sure the bend on the top is more than 90 degrees and it will stay on better.

   

  Jim Busby BYU
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20080306/be477a1b/attachment.html