[CAUT] Fwd: Steinway sound-Hammer weights

[Ron Nossaman]

On 3/1/2011 9:35 PM, Delwin D Fandrich wrote:

> And at least some hammermakers are learning how to work with heated side
> cauls in ways that do not destroy the “working” portion of the
> felt—i.e., from the parting line around the crown of the hammer.
> Technology is wonderful. OK, some technology is wonderful. Well, a
> little bit of it is, anyway….

Technology is wonderful, and defines the high end of potential. The low 
end is still defined by the operator.
Ron N