>>...Also, when the player is turned off with >>the volume at the lowest setting, the >> hammer rail stays up... >> >> Ron Nossaman > >After checking our MX100 on the floor (the latest series, just unboxed >yesterday) I found that when turning the volume down, the hammer rest rail >does indeed engage, but when the power is turned off, returns to normal >position. No pianist should have any problem with the existing system. > >Eric Leatha, RPT >Portland, OR >tunrboy@teleport.com Dear Ron, Eric, List, Ditto with Eric. The hammer rail on the 1989 MX80 I have returns to its normal position when the power is turned off. Keith A. McGavern kam544@ionet.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild Oklahoma Baptist University Shawnee, Oklahoma, USA
This PTG archive page provided courtesy of Moy Piano Service, LLC