My turn!

[Newton Hunt]

Dear Jim,

I would not rebush.  I would use compressed air and blow the bushings as
cleans as I can and then polish the ins with Flitz then lubricate the
pins AND bushings with Glide All or clean McLube.  This will bring it
all back to a workable condition, if not prestine new.

I don't like this type of thing as well.  I have seen efforts to "fix"
action problems with McLube Black, a much messier abomination than a
little graphite.  Teknishun stuph.

    Newton
    nhunt@jagat.com