Rob, Yep seen that . Took a while to figure out who was doing it. Not I said the fly. Joe---------- > From: Rob Stuart-Vail <rob_sv@email.msn.com> > To: pianotech@ptg.org > Subject: Re: Tool Kits > Date: Saturday, August 29, 1998 3:45 PM > > David, > > Looks good except for: > > > > key easer for just lifting the key and pushing key down on<< > > I call this one the "sharp-splitter". > > I think it's an ugly tool to use on a piano, and there's danger of nicking > the keypins. If you just need a *bit* of clearance between pin and bushing, > a slight sideways pressure of key against pin may do it, and sometimes a > shot of dry lube or a drop of protek on the pin will help get it going. But > that's just IMHO. > > Rob Stuart-Vail
This PTG archive page provided courtesy of Moy Piano Service, LLC