Wim, Danke! Joe Goss ---------- > From: Wim en Debby <wim.debby@village.uunet.be> > To: pianotech-digest <pianotech@ptg.org> > Subject: RE:Broken Strings > Date: Sunday, August 30, 1998 3:20 PM > > Hi List, > I read some of the reactions and l thought l could ad something to this. I > once tuned a piano of a concert pianist. It had a lot of broken strings too. > In that case it was in the trebble. I never knew how it was possible to > break so many strings, untill l read Reibeholz' book " Das regulieren von > Steinway & Sons klaviermechaniken und deren reparaturen". I found out that > the strikingpoint of a hammer is very important. When the hammer hits the > string a little too high or too low from the strikingpoint it can cause > broken strings (cuz of the false vibrations). (In case of Steinway some have > a regulationscrew in the right block to adjust the strikingpoint). Now, l > dont know if this causes the broken bass strings in the yamaha-piano > mentioned a couple a days ago or in the churchpiano's mentioned yesterday > but l hope I have added something to solve these problems. > Wim > > > Wim Vermeyen > Wim's Piano Service > wim.vermeyen@advalvas.be > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC