----- Original Message ----- From: Roger C Hayden <rchayden2@juno.com> To: <pianotech@ptg.org> Sent: Friday, December 03, 1999 9:43 AM Subject: Re: Challenge question: Where's the Squeak? > And the answer was . . . . . > > As a violin bows across the string, causing it to vibrate and sing, so > the multiple damper wires, all original components and a bit corroded, > (probably cigarette smoke from last owner), passed through their > bushings, they set the treble damper guide rail humming. "C5 > Squeeeek!!!" > > I discovered it by pedaling while pushing on the guide rail through the > strings with a screwdriver. > > Quick Solution, tighten all the guide rail screws. No More Squeak. > > Better solution, rebush the guide rail . . . OK, I will, when I rebuild, > sometime in the next millennium. > > We are going to be gone all weekend and I didn't want to make all you > good folks lose sleep. > > Roger Hayden, RPT Well I'll be gobsmacked! :) Doug Mahard
This PTG archive page provided courtesy of Moy Piano Service, LLC