Susan I've tried CA for regluing ivory and found the joint to fail most of the time. I take care to clean the ivory and keystick, but usually find that repair has failed. I don't wet either piece with anything in the cleaning process, just scrape the surfaces and wipe off with a clean rag before applying the CA. What am I missing? Paul Chick ----- Original Message ----- From: Susan Kline <sckline@home.com> To: <pianotech@ptg.org> Sent: Monday, September 25, 2000 9:38 PM Subject: Re: Enlightenment > I'll have to remember that, Carl. When I read your method, and put > myself into the picture, I see myself licking my finger and rubbing > the ivory with that. Or, I've taken a barely damp rag and cleaned the > old dirty keystick with it, so the ivory won't look gray. There's > enough dampness left on the wood/old whiting/wafer to set up > the CA just fine. I put the CA on the ivory, spread it around with > a small screwdriver (quickly!!), then press it onto the > barely damp (slightly cleaned) keystick. You get one, and only one, > chance to put it the right place. > > Susan > > ---------------------------------------------------------------------- > >Susan: Irma Bombeck used to say that the only reason she would exercise is > >so that she could hear heavy breathing again. I've gone from breathing to > >actually licking the bottom of the ivory key top and putting med or thick > >ca on the key. Don't need to put an oyster on it just a gentle lick. > >Works for me. Haven't gotten hooked on the taste yet, but haven't come > >down with any serious maladies either. Any idea on the toxicity of old > >ivory and the goop they used (whitened hide glue, I guess)? You are the > >closest thing to a toxicologist that I know. > >Regards > > > >Carl Meyer >
This PTG archive page provided courtesy of Moy Piano Service, LLC