Hi Carl, Try this site from the MMD Archives, it might point you in the right direction. http://mmd.foxtail.com/Archives/KWIC/C/conn.html Regards, John M. Ross Windsor, Nova Scotia, Canada ----- Original Message ----- From: "Carl Teplitski" <koko99@mb.sympatico.ca> To: <pianotech@ptg.org> Sent: Thursday, January 04, 2001 1:20 PM Subject: Strobe Tuner > I own and have used a Strobe tuner (ST6) in my shop for > 40 years. I do organ, accordion, used to do guitar. > ( have tuned piano for quite a while, also ) > Do not use Strobe for piano!! > Own an SOT. > > Strobe very handy for organ and accordion. > My problem is this. Years ago my strobe started > to run noisy, like a bad bearing on the motor. Ordered > a new motor from Conn and received same. New motor > made a very similar noise. Motor didn,t look new. Called > Conn, but got no satisfaction. Problem definitley seems to > be the motor. Wondering if anyone on the list experienced > this problem and how ,if in fact they did, solve it. > Noise not there when control set to C, C#, but gets louder > with each successive note going up the scale!?! > Would like to continue using unit,as it,s very handy. > Better late than never. Didn,t have access to all you > guys out there, before the internet. > > Thank You > > Carl > >
This PTG archive page provided courtesy of Moy Piano Service, LLC