tuning fork

Wimblees@AOL.COM Wimblees@AOL.COM
Mon, 19 Mar 2001 09:25:43 EST


---------------------- multipart/alternative attachment
In a message dated 3/18/01 9:06:25 PM Central Standard Time, VOCE88@AOL.COM 
writes:


> 
> >> According to my SAT III, my tuning fork is 2.5 cents flat.  I'm guessing 
>> that I can change this by filing something off of the fork- do I take some 
>> from the upper ends, bottom end, middle? 
>> 
>> 
> 
> No, don't file it at all. Just push in the slide a bit. (A little brass 
> humor) 
> Richard Galassini 

Or push in the hand a little more (a little French horn humor)
Willem 

Seriously, the ends of the tines should be filed to raise the pitch. 




---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b0/63/f9/20/attachment.htm

---------------------- multipart/alternative attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC