Jim, Sure sounds like a Viennese action to me, although I don't know why it would have been so difficult to remove. I just drops down as it slides forward. It's a little more difficult to get it back in, but easy enough with practice. My own piano is one of these, but it's not like I work on a large number of these instruments. Paul S. Larudee "Jim Coleman, Sr." wrote: > This past weekend I was in Oakland area where I saw a grand action that I > could not figure out how to remove for repairs. It was in a Keutschera > Grand. The piano had been refinished and was impeccable in appearance. > The action had rocker arms in place of capstan screws. There was a > strange action where the hammers were pivoted from the back instead of > the front. When looking into the action cavity, the first thing I saw was > a stationary rail holding stationary backchecks to which the hammers would > check. The action was higher than the bottom of the pinblock. I know of > some european actions where a tray must be slid forward and out of the > cavity so that the action and keys can drop down for removal purposes. > This action was not like that. There was no tray > > Can someone give me some help on this if you know this particular piano? > > Thanks, > > Jim Coleman, Sr.
This PTG archive page provided courtesy of Moy Piano Service, LLC