John, forgot to mention that if the brass inlay lettering is covered with a clear, satin lacquer, you can`t polish it... Kjell Kjell Sverre Fardal, NPTF / Europiano Kristiansand / Norway ksfardal@online,no -----Opprinnelig melding----- Fra: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]På vegne av Piesik, John (JPIESIK) Sendt: 14. mai 2001 18:41 Til: Pianotech Post Msg (E-mail) Emne: Fallboard Inlay Cleaning Does anyone have a safe method for polishing the brass inlay lettering of a Yamaha fallboard, without harming the surrounding finish? I've tried Cory buffbrite, but that did nothing. It's a satin, lacquer finish. Many thanks! John Piesik, RPT Oceanside, CA jpiesik@arinc.com
This PTG archive page provided courtesy of Moy Piano Service, LLC