In message <000b01c14f56$23683c20$1a34f7d1@concentric.net>, David Love <davidlovepianos@earthlink.net> writes > Peroxide is H2O2 and during the oxidation process which bleaches >them an oxygen molecule is release leaving water. Several >applications are usually required and if the heads start popping off you >have a bigger problem than you started with. The trick with Peroxide is little and often when they are under the UV lights I use a sponge with a small amount of peroxide and just wipe over the ivory's. The only time i have problems with ivory's coming off is when I used the damp white cloth method which keep the ivory damp with peroxide for to long. For resetting ivory's that are loose Acrylikey is an excellent cement for gluing ivory's you can get a good fit because Acrylikey fills any gaps in your but joint. 3 level scoops and the hardener just up to wide part on the dropper, gives you the right amount just clamp and in 10 - 15 your are ready to sand off the excess. Barrie, -- Barrie Heaton PGP key on request http://www.a440.co.uk/ AcryliKey Ivory Repair System UK © http://www.acrylikey.co.uk/ The U.K. Piano Page © http://www.uk-piano.org/ Home to the UK Piano Industry
This PTG archive page provided courtesy of Moy Piano Service, LLC