Running CA... an idea?

[Joe & Penny Goss]

RUST.
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Brian Trout" <grandrestorations@yahoo.com>
To: <pianotech@ptg.org>
Sent: Thursday, October 18, 2001 6:25 AM
Subject: Re: Running CA... an idea?


> I confess, I haven't followed the entire thread,
> but rather checked in from time to time.
> 
> I know what happens when the kicker meets a pool 
> of CA...  styrofoam!  (sure looks like it)
> 
> I haven't tried this, but it came to mind...
> 
> I've heard that one of the things that can help
> the CA to set up is water.  (I think this is the
> basic premise behind Susan Kline's CA and white
> glue techniques.)
> 
> What would happen if, after you've applied the CA
> to the pinblock, you took a spray bottle with
> nothing more than water in it and lightly sprayed
> the entire pinblock area?  I did say lightly. 
> And if you're worried about rust, take a hair
> dryer to it briefly immediately afterward.  That
> would dry the water up quickly.  Would the heat
> from the hair dryer help at all with the CA
> curing?  
> 
> Anybody out there tried it? 
> 
> Just some thoughts that came galloping through...
> 
> Back to work.
> 
> Brian T.
> 
> =====
> Brian Trout
> Grand Restorations
> 3090 Gause Blvd., #202
> Slidell, LA  70461
> 985-649-2700
> GrandRestorations@yahoo.com
> 
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com