A glue question

[Jon Page]

---------------------- multipart/alternative attachment
At 09:57 AM 09/12/2001 -0400, you wrote:

>In a message dated 12/09/01 9:00:43 AM, jon.page@verizon.net writes:
>
><< I'm testing the strength of PVC-E glue now and will have the results in
>about 30 minutes. >>
>
>Jon;
>  PVC-E glue is great for some applications....... but where there is a
>constant repetitive force applied such as on butts and catchers is not one of
>them. Since PVC-E stays flexible it will allow 'slippage' when force is
>applied. A better choice for your application would be one of the formulated
>adhesives such as DUCO or other brand which is designed to slightly etch
>plastic as part of the adhering process.
>I don't know if CA would work...but if it does I would tend to go with the
>'gel' rather than one of the thinner types.
>Jim Bryant (FL)

The hammer & catcher shanks are glued in with what appears to be PVA.
I have that too.  The label states not for use gluing plastic to wood.

Just trying to save a trip to the hardware store.

Jon Page
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f5/a9/5a/17/attachment.htm

---------------------- multipart/alternative attachment--