Voicing Tool Recommendation

[Carl Meyer]

Of course when I try that,  the needle gets so hot it turns blue.  Just shows you how hard some hammers are.  If I turn the speed down it doesn't turn.

Try this: keep a small cake of beeswax near and touch the tip of the needle to it and the needle goes right in.  Even with the rock hard hammers.  Works for me.

Carl Meyer  Assoc. PTG
Santa Clara, California
cmpiano@attbi.com 

----- Original Message ----- 
From: "Greg Newell" <gnewell@ameritech.net>
To: <pianotech@ptg.org>
Sent: Wednesday, February 13, 2002 5:47 PM
Subject: Re: Voicing Tool Recommendation


> Jason,
>     Why would you chuck it into a rotary tool if you didn't intend to spin
> it while voicing?
> 
> Greg
> 
> Jason Kanter wrote:
> 
> > > A single needle in a rotary tool (e.g.Dremel), cordless or otherwise.
> > >
> > > Paul Larudee
> > Do you spin while penetrating? Does that make a difference?
> >
> > || ||| || ||| || ||| || ||| || ||| || ||| || ||| || |||
> > jason kanter * piano tuning * piano teaching
> > bellevue, wa * 425 562 4127 * cell 425 831 1561
> > orcas island * 360 376 2799
> > || ||| || ||| || ||| || ||| || ||| || ||| || ||| || |||
> 
> --
> Greg Newell
> mailto:gnewell@ameritech.net
> 
>