Interestingly, the Renner blue hammers have no staple. David Love ----- Original Message ----- From: "Isaac OLEG SIMANOT" <oleg-i@wanadoo.fr> To: <pianotech@ptg.org> Sent: February 16, 2002 1:16 PM Subject: RE: David Love/Voicing tool Recommendation > Hello Del, > > If I understand things correctly, the term "tensioned hammer is appropriate > in the fact that on the kind of stapled hammers, the voicing is done > creating tension in the hammer while the extremity of the felt stays fixed > by the staple (and impregnation sometime) > By loosening the fiber the tension is displaced where we need it. > > The US S&S type of hammer voicing does not use the basement of the felt for > any sound production and the staples can be put off. This is a totally > different approach, and the use of lacquers/ tensioning agents does not add > so much tension that the S&S/"tensioned hammers" needling method. > > SO I find the term appropriate. > > For people who like the sound of cold pressed hammers, they surely will > appreciate to have their ancient hammers recovered with new felt, as ABEl, > RENNER, and other little shop uses to do in Europe. There you never obtain a > rock hard hammer, the big problem is that the job must be perfectly done if > we want the crown to be well centered, and the felt may be first class for > these jobs. > Have you someone doing that in the US ? > > Regards > > Isaac OLEG > > XXI century concert tech > > > -----Message d'origine----- > > De : owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]De la part > > de Delwin D Fandrich > > Envoyé : samedi 16 février 2002 21:18 > > À : pianotech@ptg.org > > Objet : Re: David Love/Voicing tool Recommendation > > > > > > > > ----- Original Message ----- > > From: "David Love" <davidlovepianos@earthlink.net> > > To: <pianotech@ptg.org> > > Sent: February 16, 2002 7:28 AM > > Subject: Re: David Love/Voicing tool Recommendation > > > > > > > .... There are times, however, when a tensioned hammer is > > appropriate and > > > I have used the Renner Blue on many occasions. > > > > > > David, > > > > What do you mean when you say 'a tensioned hammer?' If you're referring to > > the relative hardness and density of the Renner Blue hammer, this does not > > really come from having the felt under 'tension.' These > > characteristics are > > more a function of the moisture content of the felt, the amount > > of pressure > > on the press and the heat of the side cauls. All of which tend to > > reduce the > > tension in the finished hammer in much the same way that ironing > > a wool suit > > with steam, pressure and heat take out the wrinkles and set the > > fabric flat > > and wrinkle free. > > > > I would be more inclined to call the Steinway hammer (before all of the > > sanding and lacquering), the Ronsen hammer and the Isaacs hammer tensioned > > in that there is still some amount of tension in the wool fiber after > > pressing. > > > > Del > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC