---------------------- multipart/alternative attachment In a message dated 2/19/02 1:37:05 AM !!!First Boot!!!, jrpiano@win.eastlink.ca writes: > You don't have to drill out the plate. > You just use the smaller plug, and then put in a new bushing, and a 00/2 > pin. > Regards, > John M. Ross > > John Is the small plug big enough to hold a tuning pin? Or is the wood around the pin more or less a "shim." My method actually puts epoxy in the cracks, which hopefully stops the crack from getting worse. If you plug the hole, you have not eliminated, or fixed, the crack. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ca/72/ac/a9/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC