---------------------- multipart/alternative attachment In a message dated 2/19/02 1:31:49 AM !!!First Boot!!!, avery@ev1.net writes: > Hi Wim, > > I assume you have to block the bottom of the hole for this to > work. Not being "smart", just wanting to be sure what you mean! > > Avery > > Avery Yes, I shore up the bottom of the pin block. I wedge a piece of plywood, covered with felt, on which I put a piece of wax paper. The felt is there to be sure all the little gaps and curves are covered. The wax paper is there to keep the epoxy from sticking to the felt. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c8/8b/5e/d4/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC