David, Several years ago, there was a discussion about using a hair stylist's electric razor to do this. Sorry I can't remember when but it seemed like a good idea at the time. Anyone remember? Avery At 06:55 AM 02/24/02 -0800, you wrote: >The best way to reduce the noise to a minimum is to trim the trichord split >dampers where the felt protrudes below the strings. Anything below the >bottom of the string is a waste and serves no purpose. Use a very sharp >pair of small cosmetic scissors and don't hurry. > >David Love > > >----- Original Message ----- >From: "Gary Mc" <gmcc@charter.net> >To: <pianotech@ptg.org> >Sent: February 24, 2002 6:38 AM >Subject: New Yamaha C-1 "swoosh" > > > > I'm aware that Yamaha grands make a soft swoosh sound when using the >sustain pedal, caused by the trichords brushing the strings as they lift. > > A customer has a new C-1 in a room with wood floors and high ceiling. In >the ceiling over the piano, looks like a glass bubble with an art design on >it .So the acoustics in the room are very poor to begin with...In discussing >the problem, I stuck my head under the lid, and while talking it seemed >like someone turned the reverb knob up a few more knotches. So I think what >she is hearing, in addition to the swoosh, is the sound of partials becoming >active as the trichord brushes the string, because indeed, when you press >the pedal, there is a series of a tonal scale, not loud, but definately >audible. Any suggestions on what to do? > > And I've not studied this, but why does this occur on Yamaha's and not >Steinway or Baldwin? > > Thanks for any help > > Gary McCormick > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC